How to share internet

[bgpethani]

Hi Dear,

Recently I have installed Untangle 5.2 with following settings.

External IP Addr (Static) : 203.77.201.146
Gateway: 203.77.201.145
Primary DNS: 203.77.200.10
Secodnary DNS: 203.77.200.10

Internal IP Addr(static): 192.168.0.46

Now How to configure Untange 5.2, so that Other pc of lan can access internet, means I want share internet.

At untangle 5.2, internet is wroking with real ip.

Thanks
Bhavesh Pethani

[rav3n]

Hi Dear,

Recently I have installed Untangle 5.2 with following settings.

External IP Addr (Static) : 203.77.201.146
Gateway: 203.77.201.145
Primary DNS: 203.77.200.10
Secodnary DNS: 203.77.200.10

Internal IP Addr(static): 192.168.0.46

Now How to configure Untange 5.2, so that Other pc of lan can access internet, means I want share internet.

At untangle 5.2, internet is wroking with real ip.

Thanks
Bhavesh Pethani

configure other workstation like this:

Workstation IP Addr (Static) : 192.168.0.46
Gateway: Untangle IP as your gateway
Primary DNS: it could be Untagle IP also
Secodnary DNS: place DNS IP

[dmorris]

You have it setup correctly - As raven says you just need to correctly configure your internal machines...

The easiest way to do this would be to turn on DHCP and DNS if you haven't and just set your internal machines to use DHCP to get their addresses/config

[bgpethani]

configure other workstation like this:

Workstation IP Addr (Static) : 192.168.0.46
Gateway: Untangle IP as your gateway
Primary DNS: it could be Untagle IP also
Secodnary DNS: place DNS IP

Dear rav3n,

I have setup the server. off all filter and service. when server is botting, clinet pc can access the internet but after few minutes it can't.

ping is succesfull on google.com , yhaoo.com but internet is cann't.

What is the problem. Is there setting required for NAT?

Thanks
Bhavesh Pethani

[dmorris]

Dear rav3n,

I have setup the server. off all filter and service. when server is botting, clinet pc can access the internet but after few minutes it can't.

ping is succesfull on google.com , yhaoo.com but internet is cann't.

What is the problem. Is there setting required for NAT?

Thanks
Bhavesh Pethani

what is your hardware profile?

[Hamid]

I think you need to enter the Primary and Secondary DNS at the Untangle DNS servers manually. Just go the DNS option and add these Primary DNS: 203.77.200.10
Secondary DNS: 203.77.200.10. Then ask your client to do refresh by disconnecting and reconnecting their computers.

H

[mdh]

Unless my eyes are playing tricks on me, you are setting the Primary AND Secondary DNS to be the same IP address. A secondary should have a different IP. If you do not have a secondary, skip that one. Also, rav3n said to use the same IP for the second PC (192.168.0.46). You cannot have two devices using the same IP address. If 192.168.0.46 is in use, set the second one to 192.168.0.47 or 192.168.0.<anything but 46>.

[bgpethani]

Unless my eyes are playing tricks on me, you are setting the Primary AND Secondary DNS to be the same IP address. A secondary should have a different IP. If you do not have a secondary, skip that one. Also, rav3n said to use the same IP for the second PC (192.168.0.46). You cannot have two devices using the same IP address. If 192.168.0.46 is in use, set the second one to 192.168.0.47 or 192.168.0.<anything but 46>.

Dear Friends,

PC Configuration is
RAM - 512, Harddisk-40 GB, CPU: 3.0 GHZ, 2 Lan Card

External Setting:
IP: 203.77.201.154
Primary DNS: 203.77.200.10
Secondary DNS: 203.77.200.20
Getway: 203.77.201.154

Internal: 192.168.0.45

On Untagle, internet is there.

Client Information:
IP 192.168.0.48 and also check by DHCP
Getway: 192.168.0.45
Primary/Secondary DSN: Automatically

ping to all web site is sucessfull. but internet can not.

It can during booting of server (few minutes). after that internet surfing is not possible.

Thanks
Bhavesh Pethani

[Rick@BBM]

Well, stop manually configuring the IP and let us know if DHCP works.. that's a good test.

[bgpethani]

DHCP is working ok, I have checked

[Rick@BBM]

is this a windows client? If so, I've never seen a situation where you can manually assign an IP address but not the DNS.

Well, to solve the problem, just put the gateway's IP for the DNS (192.168.0.45).