RAP and 2003r2 AD

[sky-knight]

I'm not entirely sure if this is a RAP issue or an AD issue.

I have configured the AD settings and the test button says it is successful.

I click the AD Users button and all I get is [any] and I can't see any AD users in the RAP module to configure them.

So at this point I think there is something up with the way UT sees my DC. So where do I look to start troubleshooting?

[tbelote]

The two most common causes are the AD domain must be specified as the fully qualified dns name, such as example.com, example.int, or example.local.

Second, I would try it leaving the AD Organization field blank.

[sky-knight]

Very nice thanks, that was it. stuffed the .local on the end and the users filled right in.

I'm so not used to things actually WORKING on the full name. :D

[sky-knight]

Ok so I'm closer...

I have created a shortcut to the "information server" it's just a 2003 server with a 2tb array with files in it. The browser works well enough but I get an error box with no text in it when I first open it...

I have also created some RDP connections to the 3 2003 servers on this network and they give me Java.Lang.NullPointerException errors and don't connect.

Then I put my Exchange 2007's OWA in the web proxy link.. I knew it blew up the page... I didn't know it was that bad! WOW :D