PDA

View Full Version : RDC through the Untangle Box


PaulCcheyne
09-26-2007, 08:10 AM
Hi all

I was setting up the openvpn but we have decided against using it (think its a bit extreme for our needs) so we are just using RDC to access the machine we require. I have set ort forwarding up on my router to forward the rdc requet and i see it passing at my router but it fails when going throught the untangle box. if i take the untangle box out of the equasion it works fine. I have the spam, web and protocol blocker running on the untangle box. I have disabled them all but still had no luck. Also RDC is not blocked on the protocol blocker. Do i need to use the remote access portal to get this to pass RDC or do you think its a diffrent issue

thanks in advance

mdh
09-26-2007, 10:11 AM
You shouldn't need to use Remote Access Portal. Setting up port forwarding will create a pathway to the box you want to hit via RDP, but I would also make sure there is a firewall rule to allow TCP traffic on port 3389, locking down the source address/port as appropriate and if you feel its necessary.

PaulCcheyne
09-26-2007, 10:24 AM
Hi MDH

i am not using the untangle firewall as i have one on my router, just using it as a web, spyware and protocol filter, i have the port forward on my router and it works if i take the untangle box out of the equasion. any other ideas

mdh
09-26-2007, 10:35 AM
I made the assumption that you were using Untangle as your router, but your last comment makes it clear that you have a separate router. Based on that, I would make sure Untangle is in bridge mode and that you are double NATing. That would assure that your internal addresses are as you expect. Let's see if this helps!

PaulCcheyne
09-26-2007, 10:39 AM
yea untangle is in bridging mode, double natting ????. new one on me mate. Know what nat is thou

mdh
09-26-2007, 10:43 AM
AARGH! Make sure you are NOT double NATing. Sorry!

PaulCcheyne
09-26-2007, 11:01 AM
col man, thought you came up with a technology i had never heard of lol. Defo not doubl natting. Just natting at the router

mdh
09-26-2007, 12:06 PM
PaulCcheyne,

I just sent you a private message. By the way, have you checked all of the Untangle event logs for any kind of indication that may be available to you via the system?