Ok I need help

digitaldust · 01-31-2012, 09:44 PM

I have a phone VOip company testing my network to public internet .
they have a request that i open ports on the firewall well
not a big deal with most of my other stuff but with untangle how
do i do this because I can not open a range of IPs or am I missing something ?

this is my gig
Are the required ports open on the firewall/PCs?
45056—49151 (UDP)

Yes No
3239 and 5060 (TCP and UDP)

Yes No

Network:
Private (MPLS, PTP, etc.) — Turn off PC firewalls
Public (Internet) — Open firewall ports

Codec
729a, 726 or 711

QoS:
VLAN
DiffServ
Other

do I have to list my IP addresses on my network ?
as 192.168.3.2 - 192.168.3.250
if so the untangle just makes a red Error box on me >
Maybe I'm having tocobell brain farts ?
but HELP

Thanks Everyone

johnsonx42 · 01-31-2012, 09:59 PM

all outbound ports are open unless you've closed them, in which case you would know you closed them and how to open them.

The two places you could have things blocked would be in the Firewall module, or in Network->Advanced->Packet Filters. But again, by default nothing is blocked.

digitaldust · 01-31-2012, 10:32 PM

Sooooo Being that it is 01:29 over here. I had to open ports for polycom to let the ring thru to the PC so if its not a PC to net app then ? /? its open and there is no need to open the ports there just asking me to make sure its open @$%

its been a VERY long month
thanks again LOTS OF NEW tech flooding us over there

sky-knight · 01-31-2012, 10:41 PM

If your VoIP phones are behind Untangle, and your PBX is in the cloud. You don't have to do anything.

If you have a VoIP PBX behind Untangle, and want phones from the cloud to connect, you need to forward ports to the PBX according to the PBX's documentation.

You should not need to forward ports to a polycom device ever! The requisite connection details are handled when the device registers.

digitaldust · 01-31-2012, 10:54 PM

thanks guys I'm going in 1000 directions basically at the other location I just need to point to the KSU being in installed at the location MAIN Site in the untangle over there Nice thanks again every one
I'm going to push the issue about getting funding to to with the full package
THANKS AGAIN

01-31-2012, 09:44 PM	#1 (permalink)
digitaldust Newbie Join Date: Aug 2011 Posts: 8	Ok I need help I have a phone VOip company testing my network to public internet . they have a request that i open ports on the firewall well not a big deal with most of my other stuff but with untangle how do i do this because I can not open a range of IPs or am I missing something ? this is my gig Are the required ports open on the firewall/PCs? 45056—49151 (UDP) Yes No 3239 and 5060 (TCP and UDP) Yes No Network: Private (MPLS, PTP, etc.) — Turn off PC firewalls Public (Internet) — Open firewall ports Codec 729a, 726 or 711 QoS: VLAN DiffServ Other do I have to list my IP addresses on my network ? as 192.168.3.2 - 192.168.3.250 if so the untangle just makes a red Error box on me > Maybe I'm having tocobell brain farts ? but HELP Thanks Everyone

01-31-2012, 10:41 PM	#4 (permalink)
sky-knight Join Date: Apr 2008 Location: Phoenix, AZ URLs submitted: 8 Posts: 15,454	If your VoIP phones are behind Untangle, and your PBX is in the cloud. You don't have to do anything. If you have a VoIP PBX behind Untangle, and want phones from the cloud to connect, you need to forward ports to the PBX according to the PBX's documentation. You should not need to forward ports to a polycom device ever! The requisite connection details are handled when the device registers. __________________ Rob Sandling, BS:SWE, MCP Intouch Technology Phone: 480-272-9889 rob@intouchtechllc.com UntangleAppliances.com Phone: 866-794-8879

Protect

Filter

Perform

Connect

Manage

Add-Ons

01-31-2012, 09:59 PM	#2 (permalink)
johnsonx42 Master Untangler Join Date: Jan 2011 Posts: 625	all outbound ports are open unless you've closed them, in which case you would know you closed them and how to open them. The two places you could have things blocked would be in the Firewall module, or in Network->Advanced->Packet Filters. But again, by default nothing is blocked.

01-31-2012, 10:32 PM	#3 (permalink)
digitaldust Newbie Join Date: Aug 2011 Posts: 8	Sooooo Being that it is 01:29 over here. I had to open ports for polycom to let the ring thru to the PC so if its not a PC to net app then ? /? its open and there is no need to open the ports there just asking me to make sure its open @$% its been a VERY long month thanks again LOTS OF NEW tech flooding us over there

01-31-2012, 10:54 PM	#5 (permalink)
digitaldust Newbie Join Date: Aug 2011 Posts: 8	thanks guys I'm going in 1000 directions basically at the other location I just need to point to the KSU being in installed at the location MAIN Site in the untangle over there Nice thanks again every one I'm going to push the issue about getting funding to to with the full package THANKS AGAIN