How to Install All (Ntop, Webmin, PHPSysinfo, Imspector) on UT 6.2 (All Latest Rels)

[lschafroth]

I was trying to see if we could have squid assigned to the DMZ and force LAn traffic through the filter to get to the squid, but I have not heard from anyone on whether this is possible or not. For now, I no longer use squid until it works.

Lannie

[jcortes]

I get the following error when using sudo apt-get update im running 6.2 and trying to install webmin

W: GPG error: http://download.webmin.com sarge Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D97A3AE911F63C51
W: GPG error: http://www.backports.org lenny-backports Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY EA8E8B2116BA136C
W: You may want to run apt-get update to correct these problems

[lschafroth]

Originally Posted by jcortes

I get the following error when using sudo apt-get update im running 6.2 and trying to install webmin

W: GPG error: http://download.webmin.com sarge Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY D97A3AE911F63C51
W: GPG error: http://www.backports.org lenny-backports Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY EA8E8B2116BA136C
W: You may want to run apt-get update to correct these problems

You can ignore those and install it anyway.

Lannie

[jcortes]

great thank you.

[fartman]

I see the logs from IMspector, but not in Alpaca, did I missed something?

[lschafroth]

Originally Posted by fartman

I see the logs from IMspector, but not in Alpaca, did I missed something?

The original poster in another thread was Silver-Bullet. He was able to get things into Alpaca but stopped working on the scripts due to other issues and time.

Hopefully we can get his contribution again and try and get these scripts into the system a little cleaner than they are and get the proxy to work with filtering.

Lannie

[alhadi]

Hello,

Iam having problems with nTop , i installed and when i browser to 192.168.1.x:4000 it will work for few seconds if i go to traffic and view it it will say no page found and then when i browser 192.168.1.x:4000 in web browser it says page not found. Before it used to come a popup for entering username and password now it dosent comes.

Please help

What happened now no one wants to even help on this ?

[napa]

Sorry for delay.

I have been out for a while!!.

Ntop stops cause it does not support fine the untangle server, so you need to use monit to restart ntop as many times as it falls, after a while it will start working fine.

We can not make anything about.

[lschafroth]

I have installed ntop on three UT machines now and it has never stopped running yet. However, these have not been very busy machines. That is until next week when the 1700 kids get to school.

Then I will watch and see how it runs.

Lannie

[wharfratjoe]

i am not seeding any stats for eth1 (LAN adapter) - see attached images. It is in the config for ntop. I see everything for eth0 (smtp, http, ftp, etc) but no lan devices. This is important because it will tell me who and what type of services they are accessing.


Here is my /var/lib/ntop/init.cfg

USER="ntop"
INTERFACES="eth0,eth0:0,eth0:1,eth0:2,eth0:3,eth1"

"eth0,eth0:0,eth0:1,eth0:2,eth0:3" = each has a static ip for specific servers.

eth1 = LAN


also IMSPECtOR will not start at all. I followed all the directions two or three times.

i also had to change permissions for ntop to create rrd files and the graphs

I am also in need of a memory upgrade:

             total       used       free     shared    buffers     cached
Mem:          1003        988         15          0         38        124
-/+ buffers/cache:        825        178
Swap:         1906         21       1884