Any reason why a PC running off of a G41t-AD mobo wont work?

[chinwan]

Any reason why a PC running off of a G41t-AD mobo wont work?
(I tried posting the link but, I have to little posts)

Im planning on using one for an install. As of now I only have one NIC, and it is not letting me pass the initial network selection page. I dont know if that is because there is only one NIC, or it doesnt work with the built in NIC.

When I try to browse to the IP address, nothing loads.

[chinwan]

I am thinking on adding a intel EXPI9301CT as the second card, I'm wondering if that will solve it or the first internal card doesnt work anyway

[Louisd]

Chinwan;

You need at least two network adapters. Untangle must be installed in-line between your modem and the remainder of your network. In other words, traffic must enter Untangle through one adapter and exit through the other. With just one network adapter, you will never be able to achieve that. Intel adapters are generally recommended on this forum. Other brands have been reported to work fine too. To see if your specific adapter will work, scan through the forums. Ample discussion was given to the topic. The wiki also contains a lot of valuable information on this and other topics.

Hope this helps.

LD