The pc of my network do not respond to the web filter or generate reports

[emilio]

Hello, I have installed ut in all the pc have xp, and the problem is that it is working web filter nor shows me the reports of traffic, in just two pc blockade and in other were left without the internet, and I hope that i can solve this problem thanks

[WebFooL]

Hi,
to help you we need abit more info.

Is untangle in Route or Bridge mode.
Dose untangle do the DNS and DHCP or is that done by other device?

The Clients that cant access internet can they ping the internal interface of the untangle?
Can they do nslookup?

[emilio]

Originally Posted by WebFooL

Hi,
to help you we need abit more info.

Is untangle in Route or Bridge mode.
Dose untangle do the DNS and DHCP or is that done by other device?

The Clients that cant access internet can they ping the internal interface of the untangle?
Can they do nslookup?

Good afternoon you mention that untangle i want to install the vercion of linux on a pc. Ademos i have a network where the pc have fixed ip. In addition i have a firewall and a router for the internet, My consultation is as i have to that the installation to manage web filter, etc, in the pc network.

[WebFooL]

Hi,
Are the Untangle installd in bridge mode between the Router and the main Switch?

For untangle to work traffic needs to pass thru the untangle.

Here are a right and wrong way to setup the bridge.
wrong.jpg
right.jpg

[emilio]

Originally Posted by WebFooL

Hi,
Are the Untangle installd in bridge mode between the Router and the main Switch?

For untangle to work traffic needs to pass thru the untangle.

Here are a right and wrong way to setup the bridge.
Attachment 1566
Attachment 1568

It is like the figure 1566, i have : internet-router-switch-client and untangle

[WebFooL]

How is the untangle configured?
Is it Re-route, Bridge or Router mode?

[emilio]

Originally Posted by WebFooL

How is the untangle configured?
Is it Re-route, Bridge or Router mode?

This configured as a bridge from a pc under linux, i managing by web from a client pc

[WebFooL]

The bridge installd untangle have 2 nics (networkcards)

1 is the WAN interface. (often connected to the router)
and
1 is the internal interface. (often connected to the main switch)
The only way for packets reach the router should be true untangle. Meaning no other cable form the router to the main switch.

If you want untagle to limit or protect your network then traffic have to move thru the device as in image 1568.

Are you with me?

[emilio]

Originally Posted by WebFooL

The bridge installd untangle have 2 nics (networkcards)

1 is the WAN interface. (often connected to the router)
and
1 is the internal interface. (often connected to the main switch)
The only way for packets reach the router should be true untangle. Meaning no other cable form the router to the main switch.

If you want untagle to limit or protect your network then traffic have to move thru the device as in image 1568.

Are you with me?

So this configured
edit External static (wan) eth0 : connected 100Mb/s full-duplex
edit Internal bridge eth1 : connected 100Mb/s full-duplex

therefore untangle has to be before the switch? Yes, i want to work as a filter.
Because in some pc i blocks some of the pages and not in others -- because i do not show the results in the log?

[emilio]

Originally Posted by emilio

So this configured
edit External static (wan) eth0 : connected 100Mb/s full-duplex
edit Internal bridge eth1 : connected 100Mb/s full-duplex

therefore untangle has to be before the switch? Yes, i want to work as a filter.
Because in some pc i blocks some of the pages and not in others -- because i do not show the results in the log?

Good day Join Date; that otherwise you can install untangle that is not, connecting the router to untangle and ahi to switch. You can Attachment 1566, as is set in this way?