VPN Site-To-Site no Traffic from server to Client

[LLiLo]

I have to UT servers 192.168.1.0, configured as the Open VPN Server and the other server 192.168.2.0, configured as a Client. I have traffic from the client to the server but from my untangle server I can only ping the client Untangle server.
From the client side I was able to access network resources from the server but not the other way around.
Both are configured as routers, and I'm using DynDns

Any ideas on what I might be missing?

[jcoffin]

Have you tried rebooting both Untangles?

[LLiLo]

Yes both of them

[WebFooL]

LLiLo,

From a Client on the Client network do a tracert for the Untangle OpenVPN server IP and Another internal IP.

Post the results here.

[LLiLo]

Here are the results of the tracert, from a computer behind the untangle on the client side

[WebFooL]

In the tracert i see 192.168.3.0 what network is that?

Can you tracert to a unit that you can't connect to? (and post the results here)

[LLiLo]

On my original post I made a mistake typing the IP adress on the client side, the correct one is 192.168.3.1

Here is the result from a client on the server side to the client's untangle server

Tracing route to 192.168.3.1 over a maximum of 30 hops

1 9 ms 1 ms 1 ms 192.168.1.1

2 156 ms 183 ms 149 ms 192.168.3.1

Trace complete.

Here is the result from a client on the server side to a client on the client side


Tracing route to 192.168.3.151 over a maximum of 30 hops

1 11 ms 1 ms 1 ms 192.168.1.1

2 179 ms 173 ms 244 ms 172.16.0.13

3 * * * Request timed out.

4 * * * Request timed out.

5 * * * Request timed out.

6 * * * Request timed out.

7 * * * Request timed out.

8 * * * Request timed out.

9 * * * Request timed out.

10 * * * Request timed out.

11 * * * Request timed out.

12 * * * Request timed out.

13 * * * Request timed out.

14 * * * Request timed out.

15 * * * Request timed out.

16 * * * Request timed out.

17 * * * Request timed out.

18 * * * Request timed out.

19 * * * Request timed out.

20 * * * Request timed out.

21 * * * Request timed out.

22 * * * Request timed out.

23 * * * Request timed out.

24 * * * Request timed out.

25 * * * Request timed out.

26 * * * Request timed out.

27 * * * Request timed out.

28 * * * Request timed out.

29 * * * Request timed out.

30 * * * Request timed out.
Trace complete.

[WebFooL]

Do a tracert from 192.168.3.151 to 192.168.1.1

Do 192.168.3.151 use UT as GW? (Do 192.168.3.151 have windows FW active?)

[LLiLo]

Trace from 192.168.3.151 to 192.168.1.1
Tracing route to 192.168.1.1 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.3.1
2 303 ms 172 ms 173 ms 192.168.1.1
Trace complete.

192.168.3.151, uses the UT as Gateway (192.168.3.1), and the windows firewall is enabled

[LLiLo]

I just turned off the firewall, and I was able to ping the client and the trace completed.
I will test the other network resources and I will keep you posted.

THANKSSSSSSS