U150 tech specs

[jkchapman]

Does anyone have the tech specs for a U150 or direct me to where I can find them? Basically I'm looking for the NGFW Throughput on the device.

[jlficken]

I'm pretty sure the U150 has been discontinued.

It would handle 1Gbps with most (if not all) applications enabled.

Honestly though if you aren't worried about buying an appliance directly from Untangle you should look at the Supermicro 5018D-FN8T. It's a beast of a device for ~$800 and has 2xSFP+ slots for 10Gb capability.


Here are my test results on the above device.

[root @ 5018D-FN8T] ~ #
oopenssl speed -elapsed -evp aes-128-ecbYou have chosen to measure elapsed time instead of user CPU time.
Doing aes-128-ecb for 3s on 16 size blocks: 84511769 aes-128-ecb's in 3.00s
Doing aes-128-ecb for 3s on 64 size blocks: 83052880 aes-128-ecb's in 3.00s
Doing aes-128-ecb for 3s on 256 size blocks: 33659275 aes-128-ecb's in 3.00s
Doing aes-128-ecb for 3s on 1024 size blocks: 9389068 aes-128-ecb's in 3.00s
Doing aes-128-ecb for 3s on 8192 size blocks: 1213526 aes-128-ecb's in 3.00s
Doing aes-128-ecb for 3s on 16384 size blocks: 609629 aes-128-ecb's in 3.00s
OpenSSL 1.1.0j 20 Nov 2018
built on: reproducible build, date unspecified
options:bn(64,64) rc4(16x,int) des(int) aes(partial) blowfish(ptr)
compiler: gcc -DDSO_DLFCN -DHAVE_DLFCN_H -DNDEBUG -DOPENSSL_THREADS -DOPENSSL_NO_STATIC_ENGINE -DOPENSSL_PIC -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DRC4_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DGHASH_ASM -DECP_NISTZ256_ASM -DPADLOCK_ASM -DPOLY1305_ASM -DOPENSSLDIR=""/usr/lib/ssl"" -DENGINESDIR=""/usr/lib/x86_64-linux-gnu/engines-1.1""
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-128-ecb 450729.43k 1771794.77k 2872258.13k 3204801.88k 3313735.00k 3329387.18k
#

The average packet size on the internet is 576 bytes it appears so it can handle ~3.4Gbps of SSL based traffic then.

[djrees]

I found the tech specs listed here: https://untangle-firewall.it/wp-cont...t-Jan-2018.pdf

It does show the firewall throughput at 1Gbps. I have seen the U150 in action with a 1 Gig connection and it did speed test at the same speed as the ISP tech had when he was connected direct to his equipment.

I have one that I just picked up a few days ago. Want to get the LCD screen working again.
Have tried some apt-get install commands I found in another thread but they could not find the package. Anyone know the command to the package that will get the LCD working with a fresh install of 16.1.1? It was working before I wiped the previous clients config and installed new.

[donhwyo]

Open a support ticket by clicking on help on the right side of this page.

[djrees]

Open a support ticket by clicking on help on the right side of this page.

Thanks, will have to give it a try. Did not think that Home Pro included support? I am one of those who like to fix it myself when I can but this seems to be out of my reach at this time.

[Commander Cuddles]

Thanks, will have to give it a try. Did not think that Home Pro included support? I am one of those who like to fix it myself when I can but this seems to be out of my reach at this time.

Were you able to get the display working? I'm about to buy a like new U150 and fear I'll have the same issue.

TIA!

Robert

[jcoffin]

Were you able to get the display working? I'm about to buy a like new U150 and fear I'll have the same issue.

DM me your UID and I can add the LCD package.

[dillan]

I am one of those who like to fix it myself when I can but this seems to be out of my reach at this time.

[dillan]

I found in another thread but they could not find the package. Anyone know the command to the package that will get the LCD working with a fresh install of 16.1.1?

[djrees]

I found in another thread but they could not find the package. Anyone know the command to the package that will get the LCD working with a fresh install of 16.1.1?

I emailed Support and they got it working for me.