good, you must work with static routes in the default gateway in each location.
First all, sorry for the delay to answer, I am in vacation time and connect only 1 or 2 hours a day.
Ok, can view a screen of the static routing tables?
Can you do a traceroute test from each location to central and from central to each location?
Tracert from L1 to L2 & L3:
Code:Tracing route to 192.168.2.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.1.1 2 <1 ms <1 ms <1 ms 192.168.1.240 3 4 ms 4 ms 4 ms 68.137.124.77 4 11 ms 11 ms 11 ms 68.137.115.185 5 16 ms 21 ms 16 ms 68.137.115.186 6 39 ms 16 ms 38 ms 192.168.2.1 Trace complete. Tracing route to 192.168.3.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.1.1 2 <1 ms <1 ms <1 ms 192.168.1.240 3 4 ms 4 ms 4 ms 68.137.124.77 4 9 ms 9 ms 9 ms 68.139.200.69 5 13 ms 13 ms 13 ms 68.139.200.70 6 14 ms 13 ms 13 ms 192.168.3.1 Trace complete.
Tracert from L2 to L1 & L3:
Tracert from L3 to L1 & L2:Code:Tracing route to 192.168.1.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.2.1 2 <1 ms <1 ms <1 ms 192.168.2.240 3 5 ms 5 ms 5 ms 68.137.115.185 4 12 ms 12 ms 12 ms 68.137.124.77 5 16 ms 16 ms 37 ms 68.137.124.78 6 16 ms 16 ms 16 ms 192.168.1.1 Trace complete. Tracing route to 192.168.3.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.2.1 2 <1 ms <1 ms <1 ms 192.168.2.240 3 7 ms 5 ms 9 ms 68.137.115.185 4 10 ms 15 ms 14 ms 68.139.200.69 5 22 ms 16 ms 16 ms 68.139.200.70 6 15 ms 16 ms 16 ms 192.168.3.1 Trace complete.
I hope the screen-shots are what you were looking for.Code:Tracing route to 192.168.1.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.3.1 2 1 ms <1 ms <1 ms 192.168.3.240 3 6 ms 5 ms 5 ms 68.139.200.69 4 10 ms 10 ms 9 ms 68.137.124.77 5 14 ms 14 ms 14 ms 68.137.124.78 6 14 ms 14 ms 14 ms 192.168.1.1 Trace complete. Tracing route to 192.168.2.1 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.3.1 2 1 ms <1 ms <1 ms 192.168.3.240 3 5 ms 5 ms 5 ms 68.139.200.69 4 10 ms 10 ms 18 ms 68.137.115.185 5 14 ms 14 ms 14 ms 68.137.115.186 6 15 ms 15 ms 15 ms 192.168.2.1 Trace complete.
Remember, all of this is currently working just as it used to. Meaning, the NAT Policies are still set to 0.0.0.0 / 24 | Auto
Last edited by HomeNet; 03-22-2010 at 05:24 AM.
Its all correct, but you cant access to services in servers in Location 1 from loc 2 &3 . Right?
What services are?
From Internet you can access well to services?
Expand the tracert from loc2 to servers.
Like I said, everything works, right now, as it should. But, if I change those NAT Policies to what they are supposed to be according to Raditude's previous posts, all services seem to stop. The services are pretty much anything....file sharing, printing and browsing intranet sites.