Bridge install, internal has 3 networks

[don_bedlam]

We have three internal networks. How do I configure for that? I tried this morning to install Untangle in bridge mode with an address on one of the networks. Users on one of the other networks could ping the DNS servers, but not access them in any way (DNS are on the same network as untangled). I disconnect untangled and they work.

I had no problem as my machines is on the same network as DNS, untangled, etc.

More details

Firewall does routing between the internal networks to each network it is the gateway and holds the .1 address on that network.

192.168.200.0 - servers, switches, etc
192.168.201.0 - other static machines
192.168.202.0 - desktop PCs

How do I make it work?

Thanks

[hlarsen]

are all the networks downstream of the Untangle? what's the netmask of Untangle's primary IP? do you have any IP aliases entered on the Untangle?

[don_bedlam]

If by downstream you mean on the internal side, yes. It goes firewall - untangled - core switch.

I did not see a way to enter IP aliases.

[hlarsen]

you can edit them on the interface in question at Config > Networking.
try giving it IPs on those subnets or widening the mask to a /16 (i'm guessing it's /24)

[don_bedlam]

Sorry I forgot to mention the netmask. Yes, all /24s . I have since found that configuration screen and have added aliases. I will try again tomorrow and see if it is ok.

Thanks.

[don_bedlam]

No go, same issue. The only modules installed are web filter lite, protocol control (turned off) and openVPN.

[dwasserman]

I think we need more details about your network.
A pretty drawing with the ip´s involved and devices can help, and not forget the gateway in each subnet. I dont know who is the .1 in each subnetand how is the inter subnet traffic flow.

[don_bedlam]

I think we need more details about your network.
A pretty drawing with the ip´s involved and devices can help, and not forget the gateway in each subnet. I dont know who is the .1 in each subnetand how is the inter subnet traffic flow.

That is all in my first post. What else would help?

[sky-knight]

Do what hlarsen said, widen Untangle's mask to a /16.

It doesn't matter that your networks are running on /24s. /16 makes all three of your listed networks local for Untangle to process.

[don_bedlam]

Should I still keep the alias'?