Results 1 to 9 of 9
  1. #1
    Newbie
    Join Date
    Jan 2009
    Posts
    10

    Default Untangle 11.0.0 to 11.0.1 Upgrade Failure

    When navigating to Untangle, I received a notification of "Upgrade in progress. Do not reboot or power off the server!" This has been in the same state for hours now, below are the log details:

    Upgrade in progress. Do not reboot or power off the server!
    Setting up untangle-node-webfilter (11.0.0~svn20141024r38921release11.0-1wheezy) ...
    Setting up untangle-node-router (11.0.0~svn20141024r38921release11.0-1wheezy) ...
    Processing triggers for ca-certificates ...
    Updating certificates in /etc/ssl/certs... 18 added, 5 removed; done.
    Running hooks in /etc/ca-certificates/update.d....done.
    Errors were encountered while processing:
    postgresql-9.1
    E: Sub-process /usr/bin/dpkg returned an error code (1)

    apt-get autoremove --yes --force-yes --purge
    Reading package lists...
    Building dependency tree...
    Reading state information...
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    1 not fully installed or removed.
    After this operation, 0 B of additional disk space will be used.
    Setting up postgresql-9.1 (9.1.14-0+deb7u1) ...
    Starting PostgreSQL 9.1 database server: mainThe PostgreSQL server failed to start. Please check the log output: 2014-10-27 23:02:24 PDT FATAL: could not write lock file "/var/run/postgresql/.s.PGSQL.5432.lock": No space left on device ... failed!
    failed!
    invoke-rc.d: initscript postgresql, action "start" failed.
    dpkg: error processing postgresql-9.1 (--configure):
    subprocess installed post-installation script returned error exit status 1
    Errors were encountered while processing:
    postgresql-9.1
    E: Sub-process /usr/bin/dpkg returned an error code (1)

    2014-10-27:23:10 ut-upgrade.py done.
    tail: /var/log/uvm/console.log: file truncated


    Any ideas?

  2. #2
    Untangle Ninja
    Join Date
    Jan 2009
    Posts
    1,186

    Default

    Quote Originally Posted by jbalog View Post
    2014-10-27 23:02:24 PDT FATAL: could not write lock file "/var/run/postgresql/.s.PGSQL.5432.lock":
    No space left on device
    ... failed!
    Partition full?
    If you have support, your best bet would be to reach out to Untangle and see if they can remote in.

    If you get the same message after starting a new browser session you'll need to start working at the console...

  3. #3
    Newbie
    Join Date
    Jan 2009
    Posts
    10

    Default

    This is a brand new install of Untangle on a 250GB drive (single partition). Going to check console and see if there is any additional information. Is there a link for the 11.0.1 ISO that I can download and attempt to install if I need to do a fresh install?

  4. #4
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    Yes, your disk is full.

    You can download the latest Untangle here:
    http://untangle.com/download
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  5. #5
    Newbie
    Join Date
    Jan 2009
    Posts
    10

    Default

    This is the 11.0.1 version, correct? Thanks again for all of your help.

  6. #6
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    There is no 11.0.1.

    You can download 11.0
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  7. #7
    Newbie
    Join Date
    Jan 2009
    Posts
    10

    Default

    I performed a reboot disregarding the Upgrade in progress. Do not reboot or power off the server! message. It appeared to come back up with no problems, thanks for everyone's quick response!

  8. #8
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    Quote Originally Posted by jbalog View Post
    I performed a reboot disregarding the Upgrade in progress. Do not reboot or power off the server! message. It appeared to come back up with no problems, thanks for everyone's quick response!
    edit: nevermind, continue on.
    Last edited by dmorris; 10-28-2014 at 06:07 PM.
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  9. #9
    Untanglit bacquaviva's Avatar
    Join Date
    Sep 2009
    Location
    California
    Posts
    19

    Default

    Count me for another one with this message this morning

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2