Results 1 to 2 of 2
  1. #1
    Untanglit
    Join Date
    May 2009
    Posts
    16

    Default IPSec with multiple LAN and remote networks

    Is there a way to configure the IPsec plugin to pass traffic from 3 LAN subnets to 4 remote LAN subnets.

    My setup is:

    Local site = 192.168.1.0/24 - 192.168.150.0/24 - 10.10.1.0/24

    Remote site = 10.0.24.0/24 - 10.0.25.0/24 - 10.0.30.0/24

    I have set the remote network address to 10.0.16.0/20 in the IPsec config screen which does work but the IPsec plugin fails if i try to use a supernet (192.168.1.0/16) but 192.168.1.0/24 works fine.

    Can anyone help please !!

  2. #2
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Lake Tahoe
    Posts
    9,756

    Default

    Each LAN network range will need it's own IPsec configuration. So 3 X 4 = 12 IPsec configs.
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2