Connecting to Zyxel USG 100
I'm trying to establish a tunnel with a Zyxel USG 100, but the tunnel does not come up correctly. Anyone have any settings advice? What settings does Untangle try and use anyway, I can't find any documentation on that. If I can tell the admin at the other end of the tunnel what settings UT is using, they could adjust.
Here is what I'm seeing in the logs:
: "Tunnel" #1: initiating Main Mode
: "Tunnel" #1: ignoring unknown Vendor ID payload [f758f22668750f03b08df6ebe1d0]
: "Tunnel" #1: received Vendor ID payload [Dead Peer Detection]
: "Tunnel" #1: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
: "Tunnel" #1: STATE_MAIN_I2: sent MI2, expecting MR2
: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
: "Tunnel" #1: STATE_MAIN_I3: sent MI3, expecting MR3
: "Tunnel" #1: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000
: "Tunnel" #1: Main mode peer ID is ID_IPV4_ADDR: 'xxx.xxx.xxx.xx8'
: "Tunnel" #1: transition from state STATE_MAIN_I3 to state STATE_MAIN_I4
: "Tunnel" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024}
: "Tunnel" #2: initiating Quick Mode PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW {using isakmp#1 msgid:ad023784 proposal=defaults pfsgroup=OAKLEY_GROUP_MODP1024}
: "Tunnel" #2: transition from state STATE_QUICK_I1 to state STATE_QUICK_I2
: "Tunnel" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0x0ba2e618 <0x83bc7ae8 xfrm=3DES_0-HMAC_SHA1 NATOA=none NATD=none DPD=none}
: "Tunnel" #1: received Delete SA payload: replace IPSEC State #2 in 10 seconds
: "Tunnel" #1: received and ignored informational message
: "Tunnel" #1: received Delete SA payload: deleting ISAKMP State #1
: packet from xxx.xxx.xxx.xx8:500: received and ignored informational message
: "Tunnel" #3: initiating Main Mode
: "Tunnel" #3: ignoring unknown Vendor ID payload [f758f22668750f03b08df6ebe1d0]
: "Tunnel" #3: received Vendor ID payload [Dead Peer Detection]
: "Tunnel" #3: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
: "Tunnel" #3: STATE_MAIN_I2: sent MI2, expecting MR2
: "Tunnel" #3: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
: "Tunnel" #3: STATE_MAIN_I3: sent MI3, expecting MR3
: "Tunnel" #3: ignoring informational payload, type IPSEC_INITIAL_CONTACT msgid=00000000
: "Tunnel" #3: Main mode peer ID is ID_IPV4_ADDR: 'xxx.xxx.xxx.xx8'
: "Tunnel" #3: transition from state STATE_MAIN_I3 to state STATE_MAIN_I4
: "Tunnel" #3: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024}
: "Tunnel" #4: initiating Quick Mode PSK+ENCRYPT+TUNNEL+PFS+UP+IKEv2ALLOW {using isakmp#3 msgid:a422076c proposal=defaults pfsgroup=OAKLEY_GROUP_MODP1024}
: "Tunnel" #3: ignoring informational payload, type NO_PROPOSAL_CHOSEN msgid=00000000
: "Tunnel" #3: received and ignored informational message
