Results 1 to 2 of 2
  1. #1
    Untangle Ninja Mathiau's Avatar
    Join Date
    Feb 2008
    Location
    Costa Frickn' Rica
    Posts
    1,630

    Default UT to UT no connection has been authorized with policy=PSK

    So i am venturing into the world of IPSec between 2 UT boxes. I know i am not setting something up right so perhaps some direction to help me out?

    This will be a temporary set up for about 3-4 weeks at most when the old box will be removed.

    I have 2 UT boxes in different offices, same ISP, same C Class network they are on both in router mode.

    I only want this to go one way from new office to old (new 1.1.1.1 old 2.2.2.2)

    Code:
    Aug 15 15:17:01 untangle pluto[14495]: packet from 2.2.2.2:500: received Vendor ID payload [Openswan (this version) 2.6.28 ]
    Aug 15 15:17:01 untangle pluto[14495]: packet from 2.2.2.2:500: received Vendor ID payload [Dead Peer Detection]
    Aug 15 15:17:01 untangle pluto[14495]: packet from 2.2.2.2:500: initial Main Mode message received on 1.1.1.1:500 but no connection has been authorized with policy=PSK
    question is where do i set this
    authorized with policy=PSK

    or enter in the Shared Secret on the UT box i want to connect to?
    Last edited by Mathiau; 08-15-2014 at 02:26 PM.
    kv-2 | UT 11.0.1 | Dell R610 Server | Intel Xeon 2.8Ghz Quad Cores | 24Gb DDR3 ECC | 1 Intel QPort NIC | Integrated Broadcom QP | Dell Perc 4i | 6 x 73G 2.5 15k SAS raid 10 | 100mb/100mb | 30mb/30Mb

  2. #2
    Untangle Ninja Mathiau's Avatar
    Join Date
    Feb 2008
    Location
    Costa Frickn' Rica
    Posts
    1,630

    Default

    Firewall issue, port 500 blocked on my old one.

    working now i think.
    kv-2 | UT 11.0.1 | Dell R610 Server | Intel Xeon 2.8Ghz Quad Cores | 24Gb DDR3 ECC | 1 Intel QPort NIC | Integrated Broadcom QP | Dell Perc 4i | 6 x 73G 2.5 15k SAS raid 10 | 100mb/100mb | 30mb/30Mb

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2