Results 1 to 3 of 3

Thread: ipsec with nat

  1. #1
    Newbie
    Join Date
    Mar 2009
    Posts
    7

    Question ipsec with nat

    Hi everyone!

    I have a remote partner with ipsec server

    I need connect my untangle to access from my network to client network but my partner have any particular specs.

    The partner have a public ip and private subnet to access

    But I have right access only from my public ip, so I need make nat to access from my private IP

    The tunnel is stablished and the status is active with led green, but bytes out/in is 0 and show like my local network my private subnet. ie 192.168.1.0/24

    I need help to set these vpn.

    thanks!

  2. #2
    Newbie
    Join Date
    Mar 2009
    Posts
    7

    Default

    the issue is similar to these post, but I need solveit with untangle.

    https://supportforums.cisco.com/t5/v...o/td-p/1408816

    Any idea?

    Thanks.

  3. #3
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    6,783

    Default

    Are you describing both private networks with the same IP range, 192.168.1.0/24? If so, that is not possible with any VPN.
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2