fasttech

12 Likes

1. 
   fasttech liked post by jcoffin On thread : WireGuard - Connection Events not populating

   Unless you use the ping option, the report will have no data. WG is stateless so there is no connect/disconnect status.

   Liked On: 11-05-2020, 02:25 PM

2. 
   fasttech liked post by donhwyo On thread : I see that Auto Renew can't be toggled off in the Command Center anymore.

   If you don't want to renew. Remove your credit card info if you can. If you can do that, can you stop the nag about expired card? It comes up every time I log in. It has been happening for 3...

   Liked On: 10-23-2020, 02:25 PM

3. 
   fasttech liked post by Sam Graf On thread : I see that Auto Renew can't be toggled off in the Command Center anymore.

   I feel like there's a lot of tinkering going on. My feeling probably isn't accurate because any evidence I have is anecdotal, but for me, borked stuff and changing stuff and customers being the last...

   Liked On: 10-23-2020, 02:25 PM

4. 
   fasttech liked post by jcoffin On thread : I see that Auto Renew can't be toggled off in the Command Center anymore.

   That was changed if disabling within 30 days of renewal. So you are both right.

   Liked On: 10-23-2020, 12:47 PM

5. 
   fasttech liked post by Sam Graf On thread : Replacing old homebuilt with new z4.

   In my experience, the reason why it's possible to not restore the network settings is to avoid so called time bombs. Restoring to the same hardware, such as with a clean install? Restore network...

   Liked On: 10-23-2020, 12:46 PM

6. 
   fasttech liked post by jcoffin On thread : Latest upgrade and "Internal Server Error"

   Thanks for finding that. It's fixed now. Someone renamed the pages and didn't update the links.

   Liked On: 08-28-2020, 04:00 PM

7. 
   fasttech liked post by Jim.Alles On thread : What's the log for incoming traffic dropped by NAT?

   Shield_blocked is, of course, NGFW's special sauce. Invalid_Blocked is from the kernel: ...

   Liked On: 03-27-2020, 12:13 PM

8. 
   fasttech liked post by Jim.Alles On thread : What's the log for incoming traffic dropped by NAT?

   you can get it in the GUI reports, but you have to Log blocked sessions (config/network/advanced) Then filter [#reports?cat=network&rep=blocked-sessions] by the WAN IP address They are not complete...

   Liked On: 03-26-2020, 02:40 PM

9. 
   fasttech liked post by jcoehoorn On thread : NGFW 15.0.0 beta available!

   I'm kind of disappointed in that. It's ready when it's ready, but if it's not ready, let's name this release "14.3" instead of "15.0". Alternatively, go right from 15.0 to 16.0. Upding the base...

   Liked On: 01-22-2020, 10:32 AM

10. 
    fasttech liked post by CMcNaughton On thread : Cisco can kiss my...

    You're just posting what we were all thinking! :) In all seriousness, thanks for saying this. We're such a small crew, to be able to achieve a turnaround like that on an issue this big was pretty...

    Liked On: 09-18-2019, 01:51 PM

11. 
    fasttech liked post by dmorris On thread : Internal devices flooding to make external connections

    I'll give him a heads up. It was already blocking those hosts. The logging of shield blocks is not enabled by default but you can enable them in config > network > advanced > log blocked sessions....

    Liked On: 06-28-2018, 09:07 AM

12. 
    fasttech liked post by WebFooL On thread : Full tunnel test today was a success!!!

    I did a "blog" post over at Untangle.nu about how today's test with the nightly build was a success. See some nice screenshot of the settings that will make it all happen over at:...

    Liked On: 07-20-2012, 04:06 PM