Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Apr 2017
    Posts
    8

    Default Adding an SSID to Linksys WRT1900ACS with untangle

    Hi!

    I'm looking to have a separate ssid on the linksys WRT1900ACS without adding a router. So in principle a new WAP via an ethernet port I guess and having this on a different vlan. For the purpose of creating a secure IoT zone via wifi only.

    Am I making sense here? I already read on the forum untangle does not support multiple SSID's (apart from the 2.5 and 5ghz)

    thanks in advance for your help. Other recommendations on how I would go about this are also welcome of course

    Vincent

  2. #2
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,818

    Default

    Only one SSID is supported on the Untangle Linksys firmware. You can use a separate AP and wire it to a VLAN on the Linksys to create a separate network for your IoTs.
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  3. #3
    Newbie
    Join Date
    Apr 2017
    Posts
    8

    Default

    Thanks a lot for confirming jcoffin appreciated!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2