Results 1 to 3 of 3

Thread: Dual nics

  1. #1
    Untangler
    Join Date
    Sep 2015
    Posts
    30

    Default Dual nics

    Have Untangle installed on a dell desktop with a dual nic. Can I configured the dual nics to connected to the SFP ports as trunk ports on the Unifi switch? Then spread the VLans to across the 2 ports.
    Looking to create VLan 1 management, VLan 10 security, VLan 20 WLAN-Guest, VLan 30 Data-Private, VLan 40 WLAN-Private.
    Thanks for your assistance.

  2. #2
    Untangler
    Join Date
    Oct 2013
    Posts
    90

    Default

    AFAIK, there's no support for such (ie. NIC teaming, bonding, LACP, etc.) on Untangle.

    I have something similar setup at home but I used a Cisco 3560G layer-3 switch that does the inter-VLAN routing, VLAN trunking (802.1q) to other managed switches and port-channel (LACP) going to my Plex media server.

    Untangle is connected to the switch on a single gigabit routed port.

  3. #3
    Untangler
    Join Date
    Sep 2015
    Posts
    30

    Default

    Thanks for the response, will create the trunk for the VLans on eth1 on dell to the SFP port on the Unifi switch. Then on eth2 create a private wired network.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2