Results 1 to 3 of 3
  1. #1
    Newbie
    Join Date
    Nov 2016
    Posts
    7

    Default Cannot Access Admin Page in Bridge Mode

    So I bridged the internal (192.168.11.1) to the external network (ISP modem) and I can no longer access the Untangle Admin page.
    If I add the ISP provided router in between modem and UT, the ISP router (192.168.1.1) becomes the DHCP server and assigns the UT device the address 192.168.1.18
    I still cannot access the Untangle Admin page though that IP address
    Is there another way to reach the UT Admin page?

    Thanks!

  2. #2
    Untangle Ninja Jim.Alles's Avatar
    Join Date
    Jul 2008
    Location
    Central PA
    Posts
    2,606

    Default

    It may be that you have the two interfaces swapped.
    'WAN' should be facing towards the Internet, and access to the GUI will be blocked on it
    by Advanced [Access Rules]

    Where are you testing from?
    Last edited by Jim.Alles; 08-13-2020 at 04:03 AM.

  3. #3
    Newbie
    Join Date
    Jun 2020
    Posts
    5

    Default

    To add ^: If 'Allow HTTPS on WANs' is not enabled on the NGFW Access Rules (which it is disabled by default), then you won't be able to reach the admin GUI on the external interface IP. You would need to enable this default access rule or make your own.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2