Results 1 to 5 of 5
  1. #1
    Newbie
    Join Date
    Jul 2021
    Posts
    3

    Default I need help Please

    can this be done more the one device nat to the same static ip


    something like this let say device A ip is 192.168.1.20 device B 192.168.1.21

    so i go to Nat rules and do

    source ip device A 192.168.1.20 destination ip 40.255.213.43 static

    source ip device B 192.168.1.21 destination ip 40.255.213.43 static

  2. #2
    Untangle Ninja sky-knight's Avatar
    Join Date
    Apr 2008
    Location
    Phoenix, AZ
    Posts
    26,163

    Default

    source ip can accept a comma separated list of single IP addresses, or a range.

    Also please put destination interface into those rules, without it strange things can happen later.
    Last edited by sky-knight; 07-21-2021 at 09:01 AM.
    Rob Sandling, BS:SWE, MCP
    NexgenAppliances.com
    Phone: 866-794-8879 x201
    Email: support@nexgenappliances.com

  3. #3
    Newbie
    Join Date
    Jul 2021
    Posts
    3

    Default

    tha wan should be destinacion?

  4. #4
    Untangle Ninja sky-knight's Avatar
    Join Date
    Apr 2008
    Location
    Phoenix, AZ
    Posts
    26,163

    Default

    Yes, the WAN that has the public IP address the NAT rule references on it.

    If you don't add that, if you ever use Untangle for VPN, add a VLAN interface or something else that makes it route to an Internal network the NAT rule will still match causing some really ugly headaches.
    Rob Sandling, BS:SWE, MCP
    NexgenAppliances.com
    Phone: 866-794-8879 x201
    Email: support@nexgenappliances.com

  5. #5
    Newbie
    Join Date
    Jul 2021
    Posts
    3

    Default

    i dount use vpn it just i need to conect 4 devices for each of my static ip so 4 devices per ip.....thanks for the help

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2