Results 1 to 9 of 9
  1. #1
    Untangler
    Join Date
    Mar 2009
    Posts
    44

    Default Two networks and UT

    I've problem. I want set UT in bridge mode.
    Topology in attachment.
    Net 192.32.32.0/24 works fine or 10.10.10.0/24.Both never.
    i tried aliases 10.10.10.0/24 for net 192.32.32.0/24. And alias 192.32.32.0/24 for net 192.32.32.0/24
    I have no idea how solve problem

  2. #2
    Untangle Ninja sky-knight's Avatar
    Join Date
    Apr 2008
    Location
    Phoenix, AZ
    Posts
    26,546

    Default

    UT also needs routes to those networks.
    Rob Sandling, BS:SWE, MCP
    NexgenAppliances.com
    Phone: 866-794-8879 x201
    Email: support@nexgenappliances.com

  3. #3
    Untangler
    Join Date
    Mar 2009
    Posts
    44

    Default

    I set routes
    for 10.10.10.0/24 to 10.10.10.1 (gateways)
    for 192.32.32.0/24 to 192.32.32.3(gateway)
    it doesn't work

  4. #4
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    well from the diagram isn't 10.10.10.0/24 actually behind the 192.32.32.3 router?
    untangle won't know how to reach 10.10.10.1 - can it ping it?

    please describe "doesn't work" - describe what you can and cannot ping/reach.
    is the 10.* traffic being NATd at the 192.32.32.3 router? if yes, then you don't need any routes or aliases.
    if no, then you will need a route (but not an alias as it isn't truly a local subnet as far as untangle cares)
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  5. #5
    Untangler
    Join Date
    Mar 2009
    Posts
    44

    Default

    Without Ut everything is good. I have internet. From 10.10.10.0/24 and 192.32.32.0/24.

    With UT i haven't internet
    but i can ping 10.10.10.1(gw) and 192.32.32.3(gw) from both networks
    But only computers from one network (10.10.10.0/24 or 192.32.32.0/24) have access to internet.
    Ig i set UT IP 192.32.32.x net 192.32.32.0/24 has access(only)
    If i set UT IP to 10.10.10.x net 10.10.10.0/24 has access(only)

  6. #6
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    ok, so give untangle a 192.32.32.x IP and then add an alias (10.10.10.x) on the external interface.

    you don't need routes - i misunderstood your drawing.
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  7. #7
    Untangler
    Join Date
    Mar 2009
    Posts
    44

    Default

    I added aliases and nothing,

    When i stop firewall i have internet on both networks.

    This is better diagram.

  8. #8
    Untangle Junkie dmorris's Avatar
    Join Date
    Nov 2006
    Location
    San Carlos, CA
    Posts
    17,486

    Default

    ooooh - the internet is up there!

    if they have seperate gateways that isn't going to work - as untangle will route traffic to its default gateway. one cheap trick you could do is tell one of your upstream routers to route the other subnets traffic to the other router.
    Attention: Support and help on the Untangle Forums is provided by volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  9. #9
    Untangle Ninja sky-knight's Avatar
    Join Date
    Apr 2008
    Location
    Phoenix, AZ
    Posts
    26,546

    Default

    Or dual wan a bridge? I think that's the first time I've seen a network that would need such a thing.
    Rob Sandling, BS:SWE, MCP
    NexgenAppliances.com
    Phone: 866-794-8879 x201
    Email: support@nexgenappliances.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2