Results 1 to 2 of 2
  1. #1
    Newbie
    Join Date
    Feb 2020
    Posts
    6

    Default Untangle not where WAN is

    Hello there,

    I have an issue with our Untangle server since we migrated our public IPs on another site

    Is there a way to make it work through the MPLS ?

    Currently our servers are on site 1
    WAN is on site 2

    Default route is working fine for Internet.

    Public IP address is the same as before

    VPN clients cannot connect anymore.

    Is there a way to make it work ?

    Thanks

  2. #2
    Untangle Ninja sky-knight's Avatar
    Join Date
    Apr 2008
    Location
    Phoenix, AZ
    Posts
    24,219

    Default

    I'm sure there is, but you've provided insufficient detail.

    MPLS is just a virtual switch with various ports in different locations. The network you operate over it, is up to you to define. It can do just about anything.

    The circuits I've worked with will not pass VLAN tags, so I've always engineered an IP space for the MPLS network that was used for nothing else, allowing routers of any kind at each branch to do what I needed them to do.

    Untangle is usually at the head of the network, but if traffic between branches is low enough it could be at a branch too.
    Rob Sandling, BS:SWE, MCP
    NexgenAppliances.com
    Phone: 866-794-8879 x201
    Email: support@nexgenappliances.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2