Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Untangler
    Join Date
    Aug 2016
    Posts
    48

    Default Help with monitoring dual wan link drops

    I built a report that is perfect for my needs except i can only monitor a single external wan link. Is there an "OR" statement that can be used for this function? Either wan ip will report perfectly but if i add a second statement with other wan ip, nothing reports for either. Input?

  2. #2
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,932

    Default

    There is a built-in report.

    /admin/index.do#reports?cat=wan-failover&rep=wan-interface-outages
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  3. #3
    Untangler
    Join Date
    Aug 2016
    Posts
    48

    Default

    Ok i see how the above could have been misunderstood. Look to log to the dashboard all ingress drops from two wan interfaces. I have figured out how to accomplish this with a single interface, even 2 separate reports, however i cannot figure out how to view this info on a single report.

  4. #4
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,932

    Default

    Can I see the settings of the report working for one interface?
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  5. #5
    Untangler
    Join Date
    Aug 2016
    Posts
    48

    Default

    sure, took the default Network - Blocked Session report as a template and sql condition add either (server ip) or (client interface) both work but i settled on client interface because my wan ip has the potential to change. The issue is i cannot seem to add another sql condition that would allow me to see both. From testing it appears that all conditions need to match or you get no output on the report.

  6. #6
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,932

    Default

    Screen capture would be best.
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  7. #7
    Untangler
    Join Date
    Aug 2016
    Posts
    48

  8. #8
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,932

    Default

    For multiple interfaces use the SQL statement Client Interface in (1,3) . Turn off auto format (checked box is hidden in your screen capture). Where 3 is the second WAN.

    BTW, this report is not showing drops due to the provider. The drops are due to the filter dues or NAT.

    mutliple wan selection report.jpg
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

  9. #9
    Untangler
    Join Date
    Aug 2016
    Posts
    48

    Default

    the report shows drops perfectly, adding ,3 yields a report that does not output anything. I can tell when its not going to work because i get java runtime errors and then nothing. Removing the ,3 the report goes back to working perfectly.

  10. #10
    Untangler jcoffin's Avatar
    Join Date
    Aug 2008
    Location
    Sunnyvale, CA
    Posts
    7,932

    Default

    You need to add the IDs of your WANs. The 3 in the example is just a sample.
    Last edited by jcoffin; 01-30-2019 at 07:56 PM.
    Attention: Support and help on the Untangle Forums is provided by
    volunteers and community members like yourself.
    If you need Untangle support please call or email support@untangle.com

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

SEO by vBSEO 3.6.0 PL2